Large Variety

50,000+ Products Click here for tracking

Masterseal Plus

MK Electric Masterseal Plus

Description

Technical specification

A range of socket outlets specifically designedfor use outdoors or in areas heavily exposed todust and/or splashing water. Constructed fromextremely robust polycarbonate, the range issealed to IP66 against dust, water and is impactresistant and will completely protect virtuallyany 13 amp plug* including moulded plugs,allowing safe connection to any appliance.*When in doubt, please use an MK 13A plug orDuraplug.

Boxes
Rear entry back boxes are supplied for surfacemounted situations or flush mounting when usedwith Flush Mounting Bezels (K56502, 1 gang /K56503, 2 gang). These boxes must also be usedif cable or conduit enters the enclosure from therear.

IP66 Protection

Each digit in the IP (Ingress Protection) ratingdenotes resistance to dust and water. The Masterseal Plus IP66 rating breakdown is asfollows:

  •  IP66 protected to BS EN60529: 1992
  • Ideal for gardens, workshops, industry,commercial, public areas, farm buildings,ponds, pools etc
  • Easy to install: fixed gasket, captive backed out terminal screws, clearly marked top access angled terminals, push fit knockout sand conduit entries, rear drill holes
  • Patented gel seal provides durable water and dust tight seal for improved protection
  • Sealed when in use with virtually any standard 13 AMP plug, including those with moulded plug tops
  • Improved catch eases opening and closing during use
  • Manufactured from recycled polycarbonate for impact protection and environmental protection
  • 3 pin operated safety shutter on socketoutlets
  • 3mm minimum switch contact gap
  • Additional electrical safety from neutral‘make first, break last’ feature
  • Moulded ‘on’ indicator flash on switches will not rub off
  • Printed terminal markings on grey rear mouldings for clearer identification
  • Double pole switching 
  • Switch contacts with silver contacts onboth surface for good continuity
  • Products are available in grey, black and white
Sort By:  
Socket, 2 Gang Switched DP IP66
£49.85
Socket, 2 Gang Switched SP RCD Active IP66
£97.91
Switch, 1 Gang 1 Way SP IP66
£15.29
Switch, 2 Gang 1 Way SP IP66
£19.73
K56482GRY (K56482GRY)

Socket, 2 Gang Switched DP IP66

Click Here For Technical Data Sheet


Catalogue No1:K56482GRY
Brand:Masterseal Plus
Size:13A
Finish:Grey


13 AMP DP 2 GANG SWITCHED

STANDARD CARTON QUANTITY:  1

​Fixing holes are for No .8 woodscrews(not supplied).

2 gang backbox has 5 cable entries, 2 on top and 1 centrally on other 3 sides. Supplied with earth terminals in backbox

DIMENSIONS:
1 gang 157 x 110 x 80mm , 2 gang 157 x 175 x 89mm

BS 1363 Pt.2:1995

IP66 BS EN 60529 : 1992​

Socket, 2 Gang Switched DP IP66
£49.85
K56231GRY (K56231GRY)

Socket, 2 Gang Switched SP RCD Active IP66

Catalogue No1:K56231GRY
Brand:Masterseal Plus
Size:13A 30mA
Finish:Grey
Socket, 2 Gang Switched SP RCD Active IP66
£97.91
K56400GRY (k56400GRY)

Switch, 1 Gang 1 Way SP IP66


Catalogue No1:K56400GRY
Brand:Masterseal Plus
Size:10A
Finish:Grey


K56400GRY, K56400WHI, K56400BLK

10 AMP 1 GANG SP ONE-WAY

STANDARD CARTON QUANTITY:  1


Fixing holes are for No.8 woodscrews (not supplied).
Each switch is fitted with a neon which can be wired as a locator.
The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is 
supplied with an earth terminal and a loop terminal in the back box.
These switches (except push switches) do NOT have to be derated when used 
with fluorescent or inductive loads.

DIMENSIONS:  
95 x 95 x 57mm
BS EN 60669-1: 1999
IP66 to BS EN 60529: 1992

Switch, 1 Gang 1 Way SP IP66
£15.29
K56402GRY (K56402GRY)

Switch, 2 Gang 1 Way SP IP66


Catalogue No1:K56402GRY
Brand:Masterseal Plus
Size:10A
Finish:Grey


K56402

K56402GRY, K56402WHI

10 AMP 2 GANG SP ONE-WAY

STANDARD CARTON QUANTITY:  1

Fixing holes are for No:8 woodscrews (not supplied).
Each switch is fitted with a neon which can be wired as a locator.
The enclosure has 4 x 20mm entries, 1 on top, bottom and each side and is
supplied with an earth terminal and a loop terminal in the back box.
These switches (except push switches) do NOT have to be derated when used
with fluorescent or inductive loads.

DIMENSIONS:
150 x 110 x 85mm
BS EN 60669: 2000
IP56 to BS EN 60529: 1992
VDE 0632-1A

Switch, 2 Gang 1 Way SP IP66
£19.73
Per Page      1 - 4 of 4
  • 1

Shopping Cart

Brands

  • SWA
  • Eaton
  • Gewiss
  • Wiska
  • Flexicon
  • Mennekes
  • Fitzgerald
  • CK Tools
  • British Electric Lamps
  • Hager
  • Schneider
  • Carlo Gavazzi
  • ABB
  • Siemens
  • Telemecanique
  • Socomec
  • Wylex
  • Saxby
  • Pepperl + Fuchs
  • Mennekes